1-2 Days
2-3 Days
On demand
Out of stock
Indefinitely
Sold out
Print product data sheet
Rapid rivets for assembling leather work - 10 pieces.
These small rapid rivets are practical helpers for all work with leather, indispensable for making belts and especially for use together with our belt blanks.
The rapid rivet consists of two parts, a foot and a head. To fasten the rapid rivet, simply place the head on the foot and tap the hollow rivet on a firm surface, e.g. an anvil or simply a stone, with a hammer until it is completely flat.
Depending on the thickness of the material, the rivet pin at the foot should ideally still protrude 1/2 - 1 mm from the material when it is put together, but it should also not be longer. Therefore, there are four different lengths to choose from.
Rivet S = 7.5 mm pin length
Rivet M = 8.5 mm pin length
Rivet L = 11 mm pin length
Rivet XL = 13 mm pin length
The head of the rapid rivet has a diameter of 9 mm and is available in silver, brass or antique bronzed.
The base is always antique-bronzed.
Cart
